Main Characteristics:

1. Simple structure of photo-electro-mechanical integration, combine timer and camera to reduce screw joint, assembled length, instrument weight and improve impact strength and anti-shock strength
2. Straight forward display, operate and control
3. High reliability with microprocessore with power down procesion, voltage self-check, low-voltage alarm. Power down due to downhole impact or vibration can be avoid
4. Rechargable battery with special charger will reduce cost dramaticly
5. Repetition measurement can be achieved with two sets of inclinometer connected with two-point connector inside the outer tube. Then two different films can be generated at the same survey point
6. Could be used as up-hanging type or drop type
7. Replaceable with same kind of inclinometers such as the single-shot inclinometer of EASTMAN company

Specification and technical parameter:
Inclination: ±0.2°
Azimuth: ±0.5° (0°～360°) (Inclination≥5°)
GTF Angle: ±1° (0°～360°) (Inclination≥5°)
MTF Angle: ±1° (0°～360°) (Inclination< 5°)
Working Inclination: 0~90°
Max Working Temp: -10~125℃/14~257℉
Max Pressure Strength: 160MPa/23200Psi
Inclinometer Diameter: Φ31.75mm/Φ1.25in
Assembled Diameter: Φ45mm/Φ1.77in

ShiQi Test & Control

SQY-A Integrated Photographic Single-Shot Inclinometer